Butterfly valve still has the following problems during use 1. Since the multi-layer soft and hard laminated sealing ring is fixed on the valve plate when the valve plate is normally open, the medium forms a positive sco...
The difference between ball valve and butterfly valve The biggest difference between the ball valve and the butterfly valve is that the opening and closing part of the butterfly valve is a plate, while the ball valve is ...
Ball valve structure principle: 1. The ball valve is not limited by the installation direction, and the flow direction of the medium can be arbitrary. The fluid resistance is small, and the full-bore ball valve basicall...
The opening and closing part of the ball valve is a sphere with a circular channel, which rotates around an axis perpendicular to the channel, and the sphere rotates with the valve stem to achieve the purpose of opening ...
During use, if the system pressure is too large, the safety valve will jump. The pressure regulating valve can set the pressure value. When the pressure is higher than this value, the valve opens, and when the pressure i...
Electric gate valve is a kind of linear motion valve, which is matched with Z-type multi-turn actuator, and there are switch type and intelligent type. This valve is simple to operate and is a common opening and closing ...